Unmatched HVAC Services in North Haven, CT
X-Treme Temp Heating & Cooling is North Haven, CT's premier HVAC contractor, committed to maintaining your home’s comfort through all seasons. Our certified professionals provide top-tier heating and cooling solutions via our reliable and efficient service. Whether you need heating in winter or cooling in summer, we’ve got you covered.
To get started on excellent service, call X-Treme now at 203-815-6851 !
Advanced Heating Services in North Haven
Our skilled furnace technicians ensure your furnace is installed, maintained, and repaired to keep your home warm and cozy. In addition, we handle both traditional and wall-hung boiler systems, making sure they run efficiently with our comprehensive installation, maintenance, and repair services. Our expert team even provides heat pump services for energy-efficient comfort throughout the year.
Connecticut Cooling Solutions
With our air conditioning services, you'll beat the heat! We specialize in installing new systems, repairing existing units, and performing routine maintenance to keep your AC running at peak performance. Our technicians are adept at installing and maintaining central air systems, ensuring your home stays evenly cool and comfortable.
Reliable Water Heater Services
Our team installs all types of quality water heaters, including tankless, gas, and electric models, to provide a consistent hot water supply. We also provide prompt diagnoses, repair water heater issues, and offer regular maintenance to extend your unit's lifespan and efficiency.
Specialized North Haven HVAC Services
Our company provides air quality services that enhance your home’s air with solutions such as air purifiers, humidifiers, and ventilation systems. We can help you create a healthier indoor environment in your home!
You can also lower your energy bills with our energy-efficiency assessments and upgrades. We assist in choosing and installing energy-efficient HVAC systems specific to your home’s needs.
24/7 Emergency Services
Our 24/7 emergency services ensure you're never left without heating or cooling, no matter the hour. We offer:
- Rapid Response: Quick dispatch of technicians to your home.
- Immediate Diagnosis: Fast identification of issues.
- On-the-Spot Repairs: Efficient and effective repair services.
- Temporary Solutions: Provision of temporary fixes to maintain comfort until permanent repairs are completed.
- Follow-Up: Post-repair inspections to ensure system stability.
Why Choose X-Treme Temp Heating & Cooling?
- Local Expertise: As North Haven locals, we understand the specific needs and challenges of our community, from the hot summers to the chilly winters.
- Proven Track Record: We've built a strong reputation in North Haven through our consistent, high-quality service and dedication to customer satisfaction.
- Community Commitment: We actively participate in local events and support North Haven’s growth, demonstrating our investment in the community.
- Environmentally Friendly Options: We offer eco-friendly HVAC solutions that reduce your carbon footprint and promote sustainability.
- Customized Solutions: We tailor our services to meet your unique needs, ensuring optimal comfort and efficiency for your home.
Contact Us Today!
For more details and to schedule a service, connect with our team today. Let X-treme Temp Heating & Cooling be your trusted partner for your home’s comfort and efficiency.
Local Reviews
for North Haven, CT
Our Reviews by City
A little pricey but worth it for quality of service
Marianne - North Haven, CT 06473
Well informed about different products, town requirements. Open to input . Timely and professional. Thorough and accurate estimate. Installation inclusive of all necessary services- eg electrician.
Excellent
Rebecca - North Haven, CT 06473
We’ve trusted Extreme Temp for over five years, and they’ve always been dependable and ready to help whenever needed. The quality of their work is excellent, and it’s a family-run business my parents also use and trust. Best company around—highly recommend!
Excellent
Michael C - North Haven, CT 06473
There’s no better than X-TREME. Had my furnace serviced/cleaned today and I can honestly say the technicians were fantastic! They did a great job and explained to me in detail when I had a question. This is my third year doing my annual furnace cleaning I had other companies in the past but they didn’t compare. So glad found X-TREME
Excellent Service
Anthony - North Haven, CT 06473
Excellent service
Dorie - North Haven, CT 06473
Excellent Service!
Matthew - North Haven, CT 06473
Andrew was/is an amazing. He was very thoughtful, kind and very thorough in servicing my AC, water heater, and furnace. He answered every question, provided tips and tricks, and explained everything he inspected and recommended. Could not be happier with him and the service he provided.
Excellent Service!
Jenn S. - North Haven, CT 06473
Andrew was great. He was efficient, knowledgeable, and quickly solved our problem. He also was able to accommodate our last minute service call into his schedule, which we also really appreciated.
Great service
Dorie - North Haven, CT 06473
Excellent service
Dorie - North Haven, CT 06473
Great service
Dorie - North Haven, CT 06473
Great service
Dorie - North Haven, CT 06473
Boiler annual service
Elahi - North Haven, CT 06473
Mr. Larry service my boiler and he did excellent job
Excellent service
Anthony - North Haven, CT 06473
Great Service And Pricing Was Very Reasonable
Brian - North Haven, CT 06473
Larry was very informative and explained things perfectly. I would recommend his services for heating and cooling without hesitation.
Excellent!
Kathy - North Haven, CT 06473
⭐️⭐️⭐️⭐️⭐️
Michael - North Haven, CT 06473
Professional and Thorough
Kyle - North Haven, CT 06473
Andrew is professional, thorough, concise and was on time. I really like this company and will continue to use them for my central air service.
Response from X-Treme Temp Heating & Cooling, LLC:
We are so grateful for your 5-star review. Thanks for sharing your rating with us and the community.
Customer
Patricia Binkoski - North Haven, CT 06473
Responds quickly to service calls....
Cheryl - North Haven, CT 06473
I am happy to have Extreme Temp Heating and Cooling as our service provide... always can count on them for our needs however small they may be.
Excellent Service
Kathy - North Haven, CT 06473
Knowledgeable
Excellent service
Dave - North Haven, CT 06473
Alan was courteous, polite and did a great job
Complete Satisfaction - Best Company to have work done !!!
Cheryl - North Haven, CT 06473
Larry and Andrew were the most professional service reps ever to come into our home and have work done !
First service with Xtreme
Jessica - North Haven, CT 06473
Larry our service tech was pleasant and knowledgeable in answering my questions pertaining to our boiler. He completed our service efficiently and we will be using Xtreme’s again in the future!
We Definitely are glad we have X-Treme Heating and Cooling !
Cheryl - North Haven, CT 06473
We had our oil tank replaced today............extremely satisfied with exceptional work performed. No smell of oil and cleanup after was amazing. We totally we recommend this company for any and all services.
Very Professional - Exceptional
Cheryl - North Haven, CT 06473
Larry H.
Isolated the boiler and drain some water out. Removed the defective part and installed a new Low Water Cutoff Control. Filled the system, opened the valves. Started and tested the control. System is operating properly.
Larry H.
When arrived, the burner started properly. The customer mentioned that they just received an oil delivery several days ago and that’s when it went off on reset. Checked the oil filter at the tank. The filter was dirty. Replaced the oil filter. Removed the nozzle assembly and the nozzle had a black spot on the tip which can cause it not to fire correctly. Replaced the nozzle and started. System is operating properly.
Andrew H.
Installed Trane XR14 3 ton condenser and TEM6 3 ton Trane variable speed air handler. Installed supply registers, return registers, R8 wrapped metal ductwork, R8 flex, and a 1 inch filter and filter rack. Installed drain pan, float switch, drain line, lineset and thermostat wire. Had ductwork pressure tested and sealed with AeroSeal. Performed pressure test on the lineset and pulled a vacuum on it. Released the factory charge from the unit. Need to return in the spring to start and test the unit and add any additional refrigerant as needed.
Larry H.
Valved water heater. Removed and replaced the drain valve. Filled and checked for leaks.
Andrew H.
Performed pm on oil boiler Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 8.9%o2 1ppm co 0 smoke
Larry H.
Water was coming from the drain on the indirect water heater. Tightened the handle a little more and the leak stopped. Installed a drain cap on the valve.
Larry H.
Furnace was off due to the flue rollout switch was tripped. Replaced the rollout switch. Started and tested. If the problem happens again, recommend replacing the inducer motor due to the high amps that it is drawing while running.
Andrew H.
Performed pm on oil boiler Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 7.7%o2 0ppm co 0 smoke
Larry H.
The furnace was off on a roll out error code. Found the exhaust roll out tripped. Reset and the furnace started. Checked the temp at the switch, 129*f, the switch is rated for 215*f. The inducer motor is drawing 1.9 amps and rated for 1.8 amps. Performed a combustion test. Recommend replacing the rollout switch due to possibly tripping at a lower temperature and recommend replacing the inducer motor due to the higher amps which can cause the motor to overheat and slow down and possibly cause the roll out to trip.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 8.5% o2, 30 ppm, 0 smoke, 82.3% efficient System is operating properly. There is a couple of sections of flue pipe that are getting soft (easy to squeeze), recommend replacing them in the future. Also there was dryer lint around the boiler, recommend checking the dryer connections. There is corrosion around the bolts of the domestic water coil from a previous leak. Recommend replacing the coil gasket.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 5.1% o2, 34 ppm, 0 smoke, 84.4% efficient System is operating properly.
Larry H.
Performed a heating pm on an oil furnace. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 4.8% o2, 38 ppm, 82.7% efficient System is operating properly.
Larry H.
Turned the system on, there was an error code of roll out open. Found the limit on the exhaust tripped. Reset and the inducer turned on and fired properly. Cycled several times. High winds can push the exhaust down the flue and possibly trigger it after shut down.
Larry H.
24-hour Emergency Heating Repair: Responded to a late-night emergency call after the client reported that their boiler had stopped producing heat. Arrived on-site and established safe working conditions, then inspected the boiler system to identify the issue. Found a faulty ignition module preventing the burner from firing. Replaced the defective component, tested the boiler through multiple heating cycles, and verified proper operation of all safety controls. The emergency repair was successful, and the boiler is now fully operational, restoring heat during critical hours.
Jonathan L.
Ductwork Repairs: Arrived at the client’s home after they reported weak airflow in several rooms. Inspected the duct system and found multiple holes and separated seams in the supply ducting, causing significant air loss. Cleaned the affected sections, sealed the holes with mastic and reinforced tape, and repaired the loose connections. Tested airflow afterward and verified strong, consistent delivery throughout the home.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 10.2% o2, 18 ppm, 77.7% efficient System is operating properly. While performing the maintenance, noticed that water is starting to migrate into the air side of the expansion tank. The expansion tank will need to be replaced.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 4.6% o2, 25 ppm, 83.9% efficient System is operating properly.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 4.3% o2, 31 ppm, 86.1% efficient System is operating properly.
Andrew H.
Recovered all remaining refrigerant from the system. Cut out and removed the old compressor. Installed a new compressor. Brazed in new refrigerant connections. Performed a pressure test on the system. Pulled a vacuum on the system. Added factory charge to the system and added additional refrigerant as needed. Had 73* return air and 54* supply air when leaving. Pressures were 126/260 with 74* outdoor temp
Larry H.
Turned system on and both the condenser and air handler started. Checked the capacitor and pressures. Added 11 oz R410a to the system. System is cooling properly.
Andrew H.
Performed gas heating pm, gas water heater pm, and a/c pm. A/cpm Visually inspected indoor evap coil and blower compartment Checked all electrical connections and safeties Checked volts and amps Visually inspected air filter Rinsed condenser coil Blew out drain line and poured water to ensure properly draining Tested condensate pump Checked refrigerant levels Checked capacitor Took temps Furnace pm Brushed and vacuumed burner tubes Inspected and vacuumed burner, blower compartments and surrounding area Checked electrical connections and safeties Checked gas pressure Performed combustion test Inlet pressure-13 in.w.c Manifold pressure- 9.552 in.w.c. 8.8%o2 25 ppm co Water heater pm Inspected all fittings for hot and cold lines Drained pressure from the water heater Removed and washed the inlet filter Flushed the heat exchanger Checked all electrical connections Tested condensate pump and checked drain line Started and tested system
Larry H.
Turned the thermostat on, the blower started but the condenser did not. Checked for power. Found the capacitor was bad. Replaced the capacitor and the wire from the contactor to the capacitor. Turned the power on and the system started properly. Tt
Larry H.
Customer turned the system on and the air handler did not start. Chlorine power. The digital display was blank. The fuses were good and there was 24 volts. The digital display is bad. Removed the display from an unused ahu, the error was “ blower communication error”. There was 240 volts at the motor. Tried jumping out the power to the module, nothing happened. The lower motor is bad. Removed the blower assembly from an unused ahu and installed it in the bedroom air handler. Turned power on and the blower started properly. Need to replace the display module and the blower motor on the unused air handler.
Larry H.
Performed a heating pm on an oil boiler an oil hot water heater. Brushed and vacuumed. Replaced the oil filter, nozzles and strainers. Started and checked the safeties. Performed a combustion tests. System is operating properly. Performed an A/C pm. Blew out the drain line, replaced the air filter. Rinsed the condenser. Checked the electrical connections, checked the pressures and temps. Added 2 lb 15 oz R410a to the system. System is operating properly.
Larry H.
Checked the system, after several minutes of the unit by the door, it started to blink 2 times. Checked the outdoor unit and it was flashing low pressure. Added 1 lb 12oz R410a to the system. The indoor units have been running continuously, the unit by the door was discharging 42-47*F. The system is operating properly.
